Outdoor 5 years warranty IP66 LED Roadway Lighting 150W Road Lighting
Features:
© IP66 waterproof / dust proof / explosion proof / IK09
© Aluminum shape good at heat dissipation
© The lamp post can be adjusted to plus or minus 15 degrees, it can also be installed vertically
© 192pcs 3030SMD Lumileds chip, 130LM/W.
© Ra>80 / SDCM<6
© 100,000 times switching cycle
© Total harmonic distortion(THD)<10%
© Excellent post light control design, the whole lamp can achieve T II-M, T III-M, which is our advantage
© Pass 3G vibration test
© Switching cycle > 100,000 times
© Start time < 0.5S
© Lifetime>50,000 hrs
Applications:
It is mainly applied to the road lighting of urban expressway, secondary trunk road, branch road, factory, school, garden, various residential communities and courtyards. The installation height is 6-13mts and the installation
torque is 16Nm.
Installing steps:
Turn off the power before installing;
Make sure the model, rated voltage and wattage are the same with the design parameters;
Check the wire specification;
Connect the wire,Through the waterproof connector, connect the L/N wire of the street;
lamp to L/N wire of the city electricity.
1.Put the light into the light stem ( picture 1)
2.Fix the screw of handle ( picture 2)
3.check the installing of the light whether level or not .
4.Adjust the angle into which needed ( picture 3) .
5. Check the the handle screw fixed or not, if loose, should make it tightly, torque is 16NM
Audited Supplier 
){kind=link}
){kind=link}